KryTech 610
A cut protection with a maximum comfort
-
Category 2
-
EN 388
4X43C
-
ISO 13997
14.9 N (1519 g)
View technical datasheet
Download documents
Got a question? Contact
Specific advantages
Comfort
- A seamless plaited glove for very good fit, dexterity and flexibility.
- Optimal breathability
Guaranteed quality
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
Washability
- Washable up to 3 times at 60°C , allowing to extend glove lifespan, reduce costs and waste.
Practical
- Cut level easy to identify thanks to the marking on the back of the glove.
Care for the environment
- 8 gr CO₂ of carbon footprint reduction (1)
- Recycled material in the glove: 8 %
- Recycled material in the liner: 9 %
- Optimised individual packaging to limit plastic waste
- Recycled material in the packaging: 30 %
Applications
Construction industry (Construction Industry (Metalworkers/Locksmiths))
- Installing and repairing locks
- Handling
- Handling sheet metal
Automotive industry
- Handling sheet metal
- Handling and sorting small, sharp parts
Glass industry
- Handling glass sheets
Mining industry
- Maintenance with cut risk
- Mechanical maintenance
Product detail
| Material | Polyurethane |
|---|---|
| Colour | Grey |
| Interior finish | Seamless textile support from HDPE fibres |
| Exterior finish | Ventilated back |
| Length (cm) | 23-28 |
| Sizes | 5 6 7 8 9 10 11 |
| Packaging | 1 pair/bag, 12 pairs/bag, 48 pairs/carton |
| Disclaimer glimpact | (1) Measurement based on a Life Cycle Assessment (LCA) carried out using EVEA’s ASKOR tool and following the European Product Environmental Footprint (PEF 3.1) methodology adopted by the European Commission, in accordance with ISO 14040 and ISO 14044. Life cycle scope: cradle-to-grave; the use phase was not modelled. The carbon footprint results are based on actual production data collected in 2025, based a pair of cut C polyurethane gloves. |
| **Life Cycle Analysis (kg CO2eq) | 0.77 |
- (1) Measurement based on a Life Cycle Assessment (LCA) carried out using EVEA’s ASKOR tool and following the European Product Environmental Footprint (PEF 3.1) methodology adopted by the European Commission, in accordance with ISO 14040 and ISO 14044. Life cycle scope: cradle-to-grave; the use phase was not modelled. The carbon footprint results are based on actual production data collected in 2025, based a pair of cut C polyurethane gloves.
Do you have a question? Contact us!
If you have a question, need a sample or would like further technical information about our gloves and their use.
More gloves
KryTech 692
Comfort, suppleness and high dexterity thanks to its 18 gauge. Touchscreen ability. Cut level B Glove with a good visibility for a better user protection
KryTech 694
Comfort, suppleness and high dexterity thanks to its 18 gauge. Protection of electronic device from ElectroStatic Discharge (ESD), cut level D and suitable for food contact.
To contact us
If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.
