StanSolv A-15
Excellent comfort and dexterity despite the high mechanical strength
Chemical ProtectionSpecific advantages
- Nitrile compound provides unsurpassed resistance to snag, puncture, abrasion and cuts.
- Chlorinated finish provides easy on/off.
Specific features
Unique Z-Pattern Grip channels liquids away from glove surface providing an enhanced grip in wet applications.
Applications
Automotive/mechanical industry
- Automotive assembly
- Handling oily mechanical parts
- Part degreasing
Mechanical industry
- Assembly of small oily parts
- Chemical treatment of metals
- Etching / degreasing
Food industry
- Food handling
- Food preparation
Chemical industry
- Handling and transporting chemicals (solvents)
Standards
-
4101
-
Product detail
| Material | Nitrile |
|---|---|
| Colour | Green |
| Interior finish | Chlorinated |
| Exterior finish | Non-slip grip |
| Length (cm) | 33 |
| Thickness (mm) | .38 |
| Size | 6 7 8 9 10 11 |
| Packaging | 12 pairs/bag 72 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 1,1,1-Trichloroethane 99% | 71-55-6 | 75 | 3 | ASTM F739 | 1 |
|
| 2-Butoxyethanol (Butyl Cellusolve) 99% | 111-76-2 | 480 | 6 | ASTM F739 | 4 |
|
| 2-Ethoxyethanol (Cellosolve) 99% | 110-80-5 | 224 | 4 | ASTM F739 | NT |
|
| 2-Ethoxyethyl acetate (Cellosolve Acetate) 99% | 111-15-9 | 138 | 4 | ASTM F739 | NT |
|
| 2-Propanol (Isopropanol) 99% | 67-63-0 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Acetic acid 10% | 64-19-7 | 480 | 6 | ASTM F739 | 4 |
|
| Acetic acid 50% | 64-19-7 | 480 | 6 | ASTM F739 | 4 |
|
| Acetic acid 99% | 64-19-7 | 93 | 3 | ASTM F739 | NT |
|
| Butyl Acetate 99% | 123-86-4 | 55 | 2 | ASTM F739 | 4 |
|
| Cumene 98% | 98-82-8 | 191 | 4 | ASTM F739 | NT |
|
| Cyclohexane 99% | 110-82-7 | 480 | 6 | ASTM F739 | NT |
|
| Diethylamine 98% | 109-89-7 | 16 | 1 | ASTM F739 | 3 |
|
| Dimethylformamide 99% | 68-12-2 | 15 | 1 | ASTM F739 | 1 |
|
| Formaldehyde 30% | 50-00-0 | NT | NT | 3 |
|
|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | ASTM F739 | 4 |
|
| Isobutyl alcohol 99% | 78-83-1 | 480 | 6 | ASTM F739 | 4 |
|
| Isophorone diisocyanate 98% | 4098-71-9 | 480 | 6 | ASTM F739 | NT |
|
| Kerosene mixture | 8008-20-6 | 480 | 6 | ASTM F739 | 4 |
|
| m-Cresol 97% | 108-39-4 | 224 | 4 | ASTM F739 | NT |
|
| Methanol 85% | 67-56-1 | NT | NT | 4 |
|
|
| Methanol 99% | 67-56-1 | 50 | 2 | ASTM F739 | 4 |
|
| n-Heptane 99% | 142-82-5 | 480 | 6 | ASTM F739 | NT |
|
| N-methyl-2-Pyrrolidone 99% | 872-50-4 | 18 | 1 | EN 374-3:2003 | 1 |
|
| Naphtha mixture | 8030-30-6 | 480 | 6 | ASTM F739 | 4 |
|
| Naphtha VM&P mixture | 8032-32-4 | 480 | 6 | ASTM F739 | NT |
|
| Nitric acid 50% | 7697-37-2 | 277 | 5 | ASTM F739 | 3 |
|
| Phosphoric acid 75% | 7664-38-2 | 480 | 6 | ASTM F739 | NT |
|
| Phosphoric acid 85% | 7664-38-2 | 480 | 6 | ASTM F739 | NT |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | NT |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | EN 374-3:2003 | NT |
|
| Styrene 99% | 100-42-5 | 18 | 1 | EN 374-3:2003 | NT |
|
| Sulfuric acid 96% | 7664-93-9 | 34 | 2 | EN 374-3:2003 | NT |
|
| t-Butyl Methyl Ether 98% | 1634-04-4 | 238 | 4 | ASTM F739 | 4 |
|
| Tert. Amyl Methyl Ether 96% | 994-05-8 | 480 | 6 | ASTM F739 | 4 |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 260 | 5 | ASTM F739 | 4 |
|
| Toluene 99% | 108-88-3 | 18 | 1 | ASTM F739 | 2 |
|
| Trichloroethylene 99% | 79-01-6 | 12 | 1 | ASTM F739 | NT |
|
| Triethanolamine 98% | 102-71-6 | 480 | 6 | ASTM F739 | 4 |
|
| Turpentine mixture | 8006-64-2 | 480 | 6 | ASTM F739 | 4 |
|
| Unleaded gasoline mixture | 8006-61-9 | 480 | 6 | ASTM F739 | 4 |
|
| Xylene 99% | 1330-20-7 | 32 | 2 | EN 374-3:2003 | 1 |
|
*not normalized result
