ChemPly N540

Ultra-high performance chemical protection

Chemical Protection

Specific advantages

Good grip due to the embossed texture
Broad chemical resistance (acids, aliphatic solvents, solvent mixtures), increased by the thickness of the material
Easy to pull on and off, due to chlorinated interior

Specific features

The two neoprene layers superimposed increase the mechanical and chemical resistance. The glove red inner layer ensures that any wear is clearly visible, providing optimal safety for the user.

Standards

3112
ABCJKL

Product detail

Material	Polychloroprene
Colour	Black
Interior finish	Chlorinated
Exterior finish	Embossed texture
Length (cm)	36
Thickness (mm)	1.02
Size	9 10 11
Packaging	6 pairs/box 48 pairs/carton

Chemical chart

OVERALL CHEMICAL PROTECTION RATING

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of the colours :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT: Not tested

NA: "Not applicable" because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical Product	CAS #	Breakthrough time (minutes)	Permeation level	Standard	Degradation level	Rating
2-Butoxyethanol (Butyl Cellusolve) 99%	111-76-2	480	6	EN 374-3:2003	3	++
Butyl Acetate 99%	123-86-4	88	3	ASTM F739	NT	NA
Dichloromethane (Methylene Chloride) 99%	75-09-2	16	1	ASTM F739	1	-
Diethylamine 98%	109-89-7	38	2	EN 374-3:2003	1	-
Methanol 85%	67-56-1	480	6	EN 374-3:2003	4	++
Methanol 99%	67-56-1	480	6	EN 374-3:2003	4	++
Methyl Ethyl Ketone (2-Butanone) 99%	78-93-3	43	2	EN 374-3:2003	1	-
Naphtha, Hydrodesulphurized Heavy mixture	64742-82-1	359	5	EN 374-3:2003	3	++
Nitric acid 10%	7697-37-2	480	6	EN 374-3:2003	NT	NA
Nitric acid 20%	7697-37-2	480	6	EN 374-3:2003	NT	NA
Nitric acid 40%	7697-37-2	480	6	EN 374-3:2003	NT	NA
Nitric acid 50%	7697-37-2	480	6	EN 374-3:2003	NT	NA
Nitric acid 68%	7697-37-2	480	6	EN 374-3:2003	3	++
Styrene 99%	100-42-5	35	2	EN 374-3:2003	1	-
Sulfuric acid 10%	7664-93-9	480	6	ASTM F739	4	++
Sulfuric acid 40%	7664-93-9	480	6	ASTM F739	4	++
Sulfuric acid 50%	7664-93-9	480	6	ASTM F739	4	++
Sulfuric acid 96%	7664-93-9	480	6	ASTM F739	4	++
Toluene 99%	108-88-3	26	1	ASTM F739	NT	NA
Trichloroethylene 99%	79-01-6	21	1	EN 374-3:2003	1	-
Xylene 99%	1330-20-7	50	2	EN 374-3:2003	1	-