Gallery
Specific advantages
- Good compromise between thickness, suppleness and resistance
- Good grip due to the embossed texture
- Suitable for a wide range of chemical (see the chemical resistance chart)
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
- Chlorinated for a better doning
Applications
Laboratory
- Pharmaceutical preparation
Chemical industry
- Sampling chemicals
Cosmetics and Pharmaceutical industry
- Handling in laboratories
Agriculture sector
- Tractor cabin filter change
- Short contact with treated crops
Standards
-
Type B
JKT
-
-
Product detail
| Material | Nitrile |
|---|---|
| Colour | Green |
| Interior finish | Chlorinated |
| Exterior finish | Pebbled |
| Length (cm) | 24 |
| Thickness (mm) | 0.13 |
| Size | 6 7 8 9 10 |
| Packaging | 100 gloves/box 1000 gloves/carton |
| AQL Liquidproofness | 0.65 |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 2-Propanol (Isopropanol) 99% | 67-63-0 | 48 | 2 | EN 374-3:2003 | 3 |
|
| Acetic acid 99% | 64-19-7 | 2 | 0 | EN 374-3:2003 | NT |
|
| Ammonium hydroxide solution 25% | 1336-21-6 | 16 | 1 | EN 374-3:2003 | NT |
|
| Ammonium hydroxide solution 29% | 1336-21-6 | 15 | 1 | EN 374-3:2003 | 4 |
|
| Cyclohexane 99% | 110-82-7 | 86 | 3 | EN 374-3:2003 | NT |
|
| Ethanol 95% | 64-17-5 | 5 | 0 | EN 374-3:2003 | NT |
|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | EN 16523-1:2015 | 3 |
|
| Hydrochloric acid 10% | 7647-01-0 | NT | NT | 4 |
|
|
| Hydrochloric acid 35% | 7647-01-0 | NT | NT | 4 |
|
|
| Hydrochloric acid 37% | 7647-01-0 | 54 | 2 | EN 374-3:2003 | 4 |
|
| Hydrogen peroxide 30% | 7722-84-1 | 480 | 6 | EN 16523-1:2015 | NT |
|
| Isooctane 99% | 540-84-1 | 480 | 6 | EN 374-3:2003 | NT |
|
| n-Butanol 99% | 71-36-3 | 50 | 2 | EN 374-3:2003 | NT |
|
| n-Heptane 99% | 142-82-5 | 68 | 3 | EN 374-3:2003 | 2 |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | EN 16523-1:2015 | NT |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | EN 16523-1:2015 | 4 |
|
| Sulfuric acid 10% | 7664-93-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 40% | 7664-93-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 50% | 7664-93-9 | 480 | 6 | EN 374-3:2003 | 4 |
|
*not normalized result
