Classics L-210

Dexterity and flexibility adapted to contact with food

  • Excellent dexterity: a thin glove in a supple material
  • Chlorinated finish for better protection of products being handled
  • Suitable for contact with food products

Applications

  • Food industry
    • Canning
    • Cheese-making
    • Deboning poultry
    • Filleting Fish
    • Food preparation
    • Handling fruits and vegetables

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    0010
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
  • Radio-active contamination EN 421
Material Natural latex
Colour Natural
Interior Finish Smooth chlorinated
Exterior Finish Embossed texture, chlorinated
Length (cm) 31
Thickness (mm) 0.46
Size 6 7 8 9 10 11
Packaging 12 pairs/bag
144 pairs/carton
Liquidproof Protection - Classics L-210 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use this gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONAL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
    Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging, protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with a solvent (alcohol, etc...) : rub over with a dry cloth
  • in use with detergents, acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth.

Caution: Inappropriate usage of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
2-Butoxyethanol (Butyl Cellusolve) 99% 111-76-2 25 1 ASTM F739 4
+
2-Ethoxyethanol (Cellosolve) 99% 110-80-5 32 2 ASTM F739 4
+
2-Ethoxyethyl acetate (Cellosolve Acetate) 99% 111-15-9 17 1 ASTM F739 3
=
2-Propanol (Isopropanol) 99% 67-63-0 40 2 ASTM F739 4
+
Acetaldehyde 99% 75-07-0 7 0 ASTM F739 4
=
Acetic acid 10% 64-19-7 NT NT 4
NA
Acetic acid 50% 64-19-7 203 4 ASTM F739 4
++
Acetic acid 99% 64-19-7 47 2 ASTM F739 4
+
Acetone 99% 67-64-1 9 0 ASTM F739 4
=
Ammonium hydroxide solution 29% 1336-21-6 23 1 ASTM F739 4
+
Aniline 99% 62-53-3 42 2 ASTM F739 4
+
Butyl Acetate 99% 123-86-4 8 0 ASTM F739 1
-
Chromic Acid 50% 7738-94-5 27 1 ASTM F739 3
=
Cyclohexane 99% 110-82-7 6 0 ASTM F739 1
-
Dimethylformamide 99% 68-12-2 57 2 ASTM F739 4
+
Dimethylsulfoxide 99% 67-68-5 256 5 ASTM F739 4
++
Ethanol 95% 64-17-5 32 2 ASTM F739 4
+
Ethylene glycol 99% 107-21-1 480 6 ASTM F739 4
++
Formaldehyde 37% 50-00-0 480 6 ASTM F739 4
++
Glutaraldehyde 50% 111-30-8 NT NT 4
NA
Hydrazine 35% 302-01-2 NT NT 4
NA
Hydrazine 70% 302-01-2 108 3 ASTM F739 4
++
Hydrazine 98% 302-01-2 NT NT 4
NA
Hydrochloric acid 10% 7647-01-0 NT NT 4
NA
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 45 2 ASTM F739 4
+
Hydrofluoric Acid 10% 7664-39-3 480 6 ASTM F739 4
++
Hydrofluoric Acid 49% 7664-39-3 480 6 ASTM F739 4
++
m-Cresol 97% 108-39-4 136 4 ASTM F739 4
++
Methanol 85% 67-56-1 NT NT 4
NA
Methanol 99% 67-56-1 30 1 ASTM F739 4
+
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 7 0 ASTM F739 2
-
N-N dimethyl acetamide 30% 127-19-5 NT NT 4
NA
N-N dimethyl acetamide 99% 127-19-5 47 2 ASTM F739 4
+
Naphtha Heavy mixture 68551-17-7 27 1 ASTM F739 1
-
Nitric acid 10% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 20% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 40% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 50% 7697-37-2 480 6 ASTM F739 4
++
Phenol 85% 108-95-2 112 3 ASTM F739 4
++
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 4
++
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Potassium Hydroxide 50% 1310-58-3 480 6 ASTM F739 4
++
Pyridine 99% 110-86-1 9 0 ASTM F739 1
-
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Sulfuric acid 10% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 40% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 50% 7664-93-9 480 6 ASTM F739 4
++
Toluene Diisocyanate (TDI) 80% 584-84-9 480 6 ASTM F739 3
++
Triethanolamine 98% 102-71-6 480 6 ASTM F739 4
++

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed suitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.