Trilites 983

Tripolymer formula for protection against chemical splashes

  • Unique triple polymer blend for enhanced comfort and resistance.
  • Protection against chemical splashes.
  • Optimal thickness delivering maximum tactility with superior durability.

Specific features

Unique exterior polymer finish provides extraordinary grip when handling wet/dry glassware in labs


  • Laboratory
    • Research, analysis, handling of precision parts
    • Research, analysis, manipulation of precision parts, optical processes

Product details

  • Cat. 3
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
Material Natural latex, neoprene and nitrile
Colour Purple
Interior Finish Chlorinated
Exterior Finish Non-slip grip
Length (cm) 29
Thickness (mm) 0.15
Size 6 S 7 M 8 L 9 XL
Packaging 100 gloves/box
1000 gloves/carton

Operating instructions

Instructions for use

  • These gloves are designed for single use only.
  • It is not recommended for persons sensitised to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.

Storage conditions

Store the gloves in their packaging in cool dry place


  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).


Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
Standard Degradation
2-Propanol (Isopropanol) 99% 67-63-0 4 0 ASTM F1383 NT
Acetone 99% 67-64-1 1 0 ASTM F1383 NT
Ammonium hydroxide solution 29% 1336-21-6 10 0 ASTM F1383 NT
Benzene 99% 71-43-2 1 0 ASTM F739 1
Hydrochloric acid 35% 7647-01-0 10 1 EN 374-3:2003 NT
Hydrochloric acid 37% 7647-01-0 110 3 ASTM F1383 NT
Hydrofluoric Acid 49% 7664-39-3 27 1 ASTM F739 NT
Hydrogen peroxide 30% 7722-84-1 480 6 EN 16523-1:2015 NT
Hydrotreated Light Naphthenic Distillate mixture 64742-53-6 13 1 ASTM F739 1
Kerosene mixture 8008-20-6 4 0 ASTM F739 1
Methanol 99% 67-56-1 10 0 EN 374-3:2003 NT
n-Butanol 99% 71-36-3 2 0 EN 374-3:2003 NT
N-Vinyl-2-Pyrrolidinone 99% 88-12-0 8 0 ASTM F1383 NT
Naphtha VM&P mixture 8032-32-4 NT 0 ASTM F739 1
Nitric acid 68% 7697-37-2 14 1 EN 374-3:2003 NT
Phenol 85% 108-95-2 7 0 ASTM F739 3
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
Unleaded gasoline mixture 8006-61-9 1 0 ASTM F739 1

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed suitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.