StanSolv A-490

Medium Weight green Nitrile chemical resistant gloves

  • Hand specific design offers maximum dexterity and comfort in handling small parts
  • Chlorinated finish for better protection of the products being handled
  • Embossed raised-diamond grip pattern which prevents the build-up of animal fats and other greasy solids

Applications

  • Mechanical industry
    • Assembly of small, oil and grease free parts
    • Machining parts using cutting oil
    • Precision assembly
  • Other industries
    • Food industry
    • Spray-painting

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    3101
  • Specific Chemical Protection EN 374
    JKL
  • Micro-organisms EN 374
Material Nitrile
Colour Green
Interior Finish Chlorinated
Exterior Finish Embossed texture
Length (cm) 32
Thickness (mm) 0.38
Size 7 8 9 10 11
Packaging 12 pairs/bag
72 pairs/carton
Chemical Protection - StanSolv A-490 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • Persons sensitized to dithiocarbamates and thiazoles should not use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONAL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from light, humidity and heat.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened
    with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluent, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth
    Caution : improper use of the gloves or submitting them to any cleaning or laundering process can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.