Fluonit 468

Tactile sensitivity with wear-indicator

  • Excellent flexibility and thickness optimization, due to the Mapa multi-layer technology: good dexterity and comfort
  • Nitrile inner layer: excellent mechanical resistance and a longer service life
  • Green inner layer: wear-indicator for greater user safety

Applications

  • Other industries
    • Site pollution control
    • Printing
    • Petrochemical refining
  • Mechanical industry
    • Metal degreasing and etching
  • Chemical industry
    • Chemical treatments (solvents)
    • Resin and adhesive manufacturing
    • Manufacturing paints and varnishes
    • Handling and transporting chemicals (solvents)
    • Galvanoplasty

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    4102
  • Specific Chemical Protection EN 374
    ADEFGJKL
  • Micro-organisms EN 374
Material Fluoroelastomer
Colour Black
Interior Finish Chlorinated
Exterior Finish Smooth
Length (cm) 30
Thickness (mm) 0.5
Size 8 9 10
Packaging 1 pair/carton
Chemical Protection - Fluonit 468 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the “CE”-type tests.
  • Persons sensitised to dithiocarbamates and thiazoles should not use these gloves.
  • Inspect the gloves for any defect before use.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end back in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from humidity and heat.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc…) : rub over with a dry cloth
  • in use with acids and alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before reusing them.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1-Trichloroethane 99% 71-55-6 480 6 ASTM F739 NT
NA
1,2 - dichloroethane 99% 107-06-2 480 6 ASTM F739 4
++
2,2,2-Trifluoroethanol 99% 75-89-8 480 6 ASTM F739 NT
NA
Acetone 99% 67-64-1 5 0 ASTM F739 1
-
Acetonitrile 99% 75-05-8 17 1 ASTM F739 1
-
Acrylic acid 95% 79-10-7 480 6 ASTM F739 4
++
Acrylic acid 99% 79-10-7 480 6 ASTM F739 4
++
Benzene 99% 71-43-2 480 6 ASTM F739 4
++
Butyl Acetate 99% 123-86-4 72 3 ASTM F739 1
-
Carbon disulfide 99% 75-15-0 480 6 ASTM F739 4
++
Carbon Tetrachloride 99% 56-23-5 480 6 ASTM F739 NT
NA
Chlorobenzene 99% 108-90-7 480 6 ASTM F739 4
++
Chloroform 99% 67-66-3 480 6 ASTM F739 4
++
Cyclohexane 99% 110-82-7 480 6 ASTM F739 4
++
Dichloromethane (Methylene Chloride) 99% 75-09-2 64 3 ASTM F739 3
++
Diethylamine 98% 109-89-7 90 3 ASTM F739 2
+
Dimethylformamide 99% 68-12-2 41 2 ASTM F739 1
-
Ether (Diethyl Ether) 99% 60-29-7 73 3 ASTM F739 3
++
Ethyl acetate 99% 141-78-6 14 1 ASTM F739 1
-
Ethyl benzene 99% 100-41-4 480 6 ASTM F739 4
++
Furfural 99% 98-01-1 114 3 ASTM F739 NT
NA
Hydrochloric acid 10% 7647-01-0 480 6 ASTM F739 NT
NA
Hydrochloric acid 37% 7647-01-0 480 6 ASTM F739 NT
NA
Iodomethane (Methyl Iodide) 99% 74-88-4 480 6 ASTM F739 NT
NA
Methanol 85% 67-56-1 NT NT 4
NA
Methanol 99% 67-56-1 108 3 ASTM F739 4
++
Methyl Acrylate 99% 96-33-3 26 1 ASTM F739 NT
NA
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 11 1 ASTM F739 1
-
n-Heptane 99% 142-82-5 480 6 ASTM F739 4
++
n-hexane 95% 110-54-3 480 6 ASTM F739 4
++
N-N dimethyl acetamide 99% 127-19-5 33 1 ASTM F739 1
-
Nitric acid 10% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 20% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 40% 7697-37-2 480 6 ASTM F739 4
++
Nitric acid 50% 7697-37-2 480 6 ASTM F739 4
++
Pentane 99% 109-66-0 480 6 ASTM F739 4
++
Phenol 85% 108-95-2 480 6 ASTM F739 NT
NA
Phenol 99% 108-95-2 NT NT 4
NA
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 NT
NA
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Styrene 99% 100-42-5 480 6 ASTM F739 4
++
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 50% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 96% 7664-93-9 480 6 EN 374-3:2003 4
++
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 480 6 ASTM F739 NT
NA
Tetrahydrofurane 99% 109-99-9 13 1 ASTM F739 1
-
Toluene 99% 108-88-3 480 6 ASTM F739 4
++
Trichloroethylene 99% 79-01-6 480 6 ASTM F739 NT
NA
Vinyl acetate 99% 108-05-4 29 1 ASTM F739 NT
NA
Xylene 99% 1330-20-7 480 6 ASTM F739 4
++

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed suitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.